< Back Gardener

Assembly Guide for Gardener Shed (pdf file).

A set of 75x50mm tanalised bearers will greatly increase the life of your building by creating a gap between the floor joists and the ground allowing a good ventilation and also helping to prevent damp.

 

Maximum protection for your wood. Our solvent based wood treatment will penetrate deep into the wood giving you years of protection against the weather. It will enhance timber grain with a rich long lasting protection. A water repellant formula is harmless to plant when dry. All done in our factory you saving you time trouble mess and effort.

 

The Gardener

Designed with a dual purpose , this shed makes the most of natural light and has a useful full length bench under the window. An optional stable door will further enhance the building allowing more air to circulate on hot days. Available with the door at either end. Made from 12mm tongued/grooved weatherboard cladding . 27mm x 44mm framing , tongued/grooved roof and floor. Timber sizes stated are what you get.

 

Specifications

• 12mmx125mm Tongued and grooved weatherboard.cladding
• Framing 45mmx29mm rounded corners.
• 12mmx125mm Tongued and grooved boardsroof and floor.
• 20kg green mineral roofing felt.
• Glazing 2mm Styrene.
• Zinc plated tee hinges.
• Press lock and key.
• Galvanised clout nails.
• Zinc screws.
• Plated nails.
• Environmentally base coat preservative.