< Back Garsdale Apex Shed

Assembly Guide for Garsdale Apex Shed (pdf file).

A set of 75x50mm tanalised bearers will greatly increase the life of your building by creating a gap between the floor joists and the ground allowing a good ventilation and also helping to prevent damp.

 

Maximum protection for your wood. Our solvent based wood treatment will penetrate deep into the wood giving you years of protection against the weather. It will enhance timber grain with a rich long lasting protection. A water repellant formula is harmless to plant when dry. All done in our factory you saving you time trouble mess and effort.

 

The Garsdale Range

Only the apex and pent models are available,. With maximum strength and durability this range is made from thicker materials than most other heavy duty sheds. 16mm thick tongued/ grooved matchboard cladding, super strong framing 44mm x 44mm. Internally, roof trusses and diagonal bracing struts are standard. Tongued and grooved roof/floor. Windows have internal cross bars for extra security along with sentinel security screws on hinges and hasp/staple. Even the roofing felt is heavy duty. Double doors at no extra cost afford plenty of width for getting lawn mowers, bikes and other awkward items in and out. Generous eaves height allows lots of headroom. Timber sizes stated are what you get.

 

Specifications

• 16mmx125mm Tongued and grooved matchboards.cladding
• Framing 44mmx44mm rounded corners.
• 16mmx125mm Tongued and grooved boards roof and floor.
• Heavy duty green mineral roofing felt.
• Glazing 2mm Styrene.
• Zinc plated tee hinges.
• Saftey Hasp/Staple
• Security screws
• Galvanised clout nails.
• Zinc screws.
• Plated nails.
• Environmentally base coat preservative.