< Back Rustic Apex Shed

Assembly Guide for Rustic Apex Shed (pdf file).

A set of 75x50mm tanalised bearers will greatly increase the life of your building by creating a gap between the floor joists and the ground allowing a good ventilation and also helping to prevent damp.

 

Maximum protection for your wood. Our solvent based wood treatment will penetrate deep into the wood giving you years of protection against the weather. It will enhance timber grain with a rich long lasting protection. A water repellant formula is harmless to plant when dry. All done in our factory you saving you time trouble mess and effort.

 

Rustic Range

A limited number of sizes and styles in a traditional method of over lapping feathered edge boards.
These sheds are beautifully manufactured from good quality cladding 10mm thick boards with a generous over lap. 11mm rigid sheet roof and floor. A substantial frame of 32mm x38mm gives the shed the required strength they need to stand up to the recent high winds and storms which now appear to be common place. The interior is finished with a specially formulated lining paper to prevent draughts and give a superior internal finish, probably exclusive to our rustic range sheds.

 

Timber sizes stated are what you get.

 

To avoid disappointment when purchasing an overlapping shed from our competitors, check the material specification to ensure you are getting timber of the necessary thickness. Some sheds will fall apart after the first storm.

 

Specifications

• Sawn Feathered edge 10mmx100mm cladding.
• Framing 32mmx38mm.
• 11mm rigid sheet material roof and floor.
• 20kg green mineral roofing felt.
• Zinc plated tee hinges.
• Safety Hasp and Staple.
• Galvanised clout nails.
• Zinc screws.
• Plated nails.
• 120gsm lining paper.
• Environmentally base coat preservative.