FREEPHONE: 0800 9172866
< Back Security Pent Shed
(Photograph is of 6x4' model)
Security Pent 5x4'
Size ft/mtrs5x4' / 1.52x1.22 Eaves Height5'10''/1.78 Ridge Height6'7'' /2.01Security Pent 6x4'
Size ft/mtrs6x4' / 1.83x1.22 Eaves Height5'10''/1.78 Ridge Height6'7'' /2.01Security Pent 7x5'
Size ft/mtrs7x5' / 2.13x1.52 Eaves Height5'10''/1.78 Ridge Height6'7'' /2.01Security Pent 8x6'
Size ft/mtrs8x6' / 2.44x1.83 Eaves Height5'10''/1.78 Ridge Height6'7'' /2.01Security Pent 10x6'
Size ft/mtrs10x6' / 3.05x1.83 Eaves Height5'10''/1.78 Ridge Height6'7'' /2.01Security Pent 10x8'
Size ft/mtrs10x8' / 3.05x2.44 Eaves Height5'10''/1.78 Ridge Height6'7'' /2.01Security Pent 12x8'
Size ft/mtrs12x8' / 3.66x2.44 Eaves Height5'10''/1.78 Ridge Height6'7'' /2.01Assembly Guide for Security Pent Shed (pdf file).
A set of 75x50mm tanalised bearers will greatly increase the life of your building by creating a gap between the floor joists and the ground allowing a good ventilation and also helping to prevent damp.
Maximum protection for your wood. Our solvent based wood treatment will penetrate deep into the wood giving you years of protection against the weather. It will enhance timber grain with a rich long lasting protection. A water repellant formula is harmless to plant when dry. All done in our factory you saving you time trouble mess and effort.
Security
Built to make it difficult for thieves and burglars. This range of sheds include framing at 254mm centres . Extra strong door with butt hinges and two mortise deadlocks. Made from 12mm tongued /grooved cladding, 27mmx44mm framing, 12mmtongued/grooved roof and floor. Timber sizes stated are what you get.
Specifications
- 12mmx125mm Tongued and grooved weatherboard.cladding
- Framing 45mmx29mm rounded corners.
- 12mmx125mm Tongued and grooved boardsroof and floor.
- 20kg green mineral roofing felt.
- Butt hinges.
- Two 3 lever deadlocks.
- Galvanised clout nails.
- Zinc screws.
- Plated nails.
- Environmentally base coat preservative.