< Back Wharfedale Maxi Shed

Assembly Guide for Wharfedale Maxi Shed (pdf file).

A set of 75x50mm tanalised bearers will greatly increase the life of your building by creating a gap between the floor joists and the ground allowing a good ventilation and also helping to prevent damp.

 

Maximum protection for your wood. Our solvent based wood treatment will penetrate deep into the wood giving you years of protection against the weather. It will enhance timber grain with a rich long lasting protection. A water repellant formula is harmless to plant when dry. All done in our factory you saving you time trouble mess and effort.

 

The Wharfedale Range

A full range of apex , pent and cabin styles. Also small storage sheds with increasing popularity due to the smaller out door space to be had with new properties. Ideal for garden equipment, bikes etc.

 

Made from 12mm thick tongued and grooved weatherboard cladding , 27mm x 44mm framing to give the building more than adequate strength and resistance.
With rigid sheet material roof and floor .
This range offers good looks as well as practicality giving you that extra storage space.

 

Timber sizes stated are what you get.

 

Specifications

• 12mmx125mm Tongued and grooved weatherboard cladding.
• Framing 45mmx29mm rounded corners.
• 11mm rigid sheet material roof and floor .
• 20kg green mineral roofing felt.
• Glazing 2mm Styrene.
• Zinc plated tee hinges.
• Press lock and key.
• Galvanised clout nails.
• Zinc screws.
• Plated nails.
• Environmentally base coat preservative.